Single Band PIM Analyzers
The Single-Band PIM Analyzers which cover 350~3500MHZ frequancy band are used for measuring PIM on broadband passive components (such as base station antenna ,RF connector ,cavity filter, arrester,jump cable,low PIM termination,ect) .These have two measurement models---"Production Mode" and "Engeering Mode " which makes more convenient and accurate observation and analysis of the results of measurement.There are two different configuration of single band analyzers--- "6U type" and "3U type" as follows:
6U type：
6U type has conventional structure with larger inner capacity, which is great for heat dissipation under high-temperature environment.
3U type：
3U type is assembled by two cases. It has two outstanding features. Firstly, interference has been greatly reduced by separating RF amplifier and duplexer
receiver. Secondly, the Multiple Band Analyzer can be easily assembled by connecting different Single-Band Analyzers via cables.
Product Features
Fully configurable frequencies, power and IM products
High intergration density,no need to build complicated platform
Simple to operate, user-friendly bilingual (English/Chinese)
Reflect (standard) and transmit(option)
Data stored
Barcode scannnig(option)
Insertion loss compensation fuction gurantees testing accuracy
Double reflector ports test with one click(option)
Three methods of measurement :Dot frequency,Frequency sweep and Time domain
All bands of China Mobile are covered in PIM testing
Analyzed result can be exported in format of Microsoft Word/Excel/PDF.
Technical Specifications
System
| Measurement Method | Reverse (Reflected) PIM / Transmitted PIM |
| Reversed Reisdual PIM | < -165dBc@2×+43dBm |
| Trasmission Reisdual PIM | < -163dBc@2×+43dBm |
| Testing Ports | 2×RF output (7/16 DIN female) |
| User Interface | 4×USB,1×LAN |
| Display | 18"LCD |
| Intermodulation order | IM2 / IM3 / IM5 / IM7 / IM9 |
Trasmitter
| Frequency Increment | 200KHz/500kHz/1MHz/2MHz/5MHz/10MHz |
| Frequency Accurancy | ±3ppm |
| Power per tone (adjustable) | 2×1 to 25W (+30 to +44dBm ) |
| Power Stepping | 0.5dB |
| Power Stablity | ±0.5dB |
| Reverse Power Protection | 100W |
Receiver
| Measurement Noise Floor | ≤-138dBm |
| Measurement Range | -55dBm to -138dBm |
| Receiver Accuracy | ≤±0.5@-100dBm |
Electrical
| Mains Power | AC 175-250V,50Hz |
| AC Power | 450W |
| Warm-up Time | 3 Minutes |
Mechnical
| Dimensions/Weight | 6U: 470×500×285mm (L×W×H)/approx 30kg |
| 3U×2: 2×480×500×132mm (L×W×H)/approx 30kg | |
| Cooling | Forced Air |
Environmental
| Operating Temperature Range | -5 ℃to +35℃ |
| Protection Grade | Indoor Use |
| Relative Humidity | 5% to 90% RH no-condensing |
Models
| System | TX Frequancy | RX Frequency | |
| PIM700S | LTE | 745-793MHz | 697-720MHz |
| PIM800S | CDMA/NADC/AMPS | 869-894MHz | 824-849MHz |
| PIM900S | GSM | 935-960MHz | 890-915MHz |
| PIM1800S | DCS 1800 | 1805-1880MHz | 1710-1785MHz |
| PIM1900S | PCS 1900/LTE | 1930-1990MHz | 1850-1910MHz |
| PIM2100S | WCDMA/CDMA 2000 | 2110-2170MHz | 1920-2060MHz |
| PIM2400S | WLAN | 2400-2483.5MHz | 2305-2336.5MHz |
| PIM2600S | WiMAX/UMTS2 | 2620-2695MHz | 2545-2580MHz |
| PIM3500S | WiMAX/Wireless IP | 3510-3594MHz | 3410-3484MHz |
* Customized